CTSU209 – Full package
CTSU209 is a full-package solution, capable to string up to 2 catenary and contact wires simultaneously, under different tensions (min of 5kN to not less than 25kN) with independent controls, in two working directions. The opposite working direction is available for recovery or for stringing only. A tensioning system for railway wiring operations is composed by working units mounted on 2 flats, to be installed on one existing railway wagon provided by the customer.
Benefits
The tensioning system installed on bearing frames, allows a modularity of the whole winch/reels/recovery stand/mast optimizing space and creating better maintainability
- The system is equipped with devices for recovering the old catenary along with devices to string the new catenary at the same time; this provides a more effective operation by reducing operative units
- Full package including auxiliary devices such as lifting crane and tail wire system
The control panel provides all the control devices necessary for stringing and recovering operations
New Tesmec designed electronic controls that allow a more simple use and a careful control of all operating parameters
The circuit is designed to grant the maximum level of safety in case of failures
Technical Features
- 1 independent twin puller-tensioner
- 4 motorized reel stands
- 1 power unit
- 1 centralized control system
- 1 operator’s cabin
- Wire guiding rollers on the platform
- 3 wire guiding telescopic adjustable top rollers
- 1 wire positioner mast
- 2 recovery reel-stands with hydraulic drive
- 2 detachable side and conical reels
- 2 rope guiding telescopic adjusting top rollers for recovery reel
- 2 supporting flat
- 1 crane
- 2 tail wire
Technical specifications
| Max tension | Power | Dimensions | Mass |
| 2 X 25 kN | 129 kW | L: 24400mm H: 3140mm (upper structure) | 32000 kg |
Related Articles
